On-Grid Inverter
R1 Moto
RENAC R1 Moto Series inverter fully meets the market’s demand for high-power single-phase residential models. It is suitable for rural houses and urban villas with larger roof areas. They can substitute to install two or more low power single-phase inverters. While ensuring the revenue of power generation, the system cost can be greatly reduced.
-
16A
Max. PV
input current
-
AFCI
Optional AFCI
protection function
-
150%
150% PV
input oversizing
Export control function integrated
Over-temperature protection
Type II SPD for both DC and AC
Remote firmware upgrade & setting
| Model | R1-8K | R1-10K |
| Max. PV Input Voltage[V] | 600 | |
| Max. PV Input Current [A] | 32/32 | 32/32 |
| No.of MPPT Trackers/No.of Input Strings per Tracker | 2/2 | 2/2 |
| Max. AC Output Apparent Power [VA] | 8800 | 10000 |
| Max.Efficiency | 98.1% | |
On-Grid Inverter
RENAC R1 Moto Series inverter fully meets the market’s demand for high-power single-phase residential models. It is suitable for rural houses and urban villas with larger roof areas. They can substitute to install two or more low power single-phase inverters. While ensuring the revenue of power generation, the system cost can be greatly reduced.
Download More
Product Video
Related FAQs
-
1.Why the device can't be registered in Renac SEC monitoring?
Cause of occurrence:
The user selected the wrong system type when doing the power station registration.
Solution：
Please select the correct system type when doing the power station registration.
-
2.Why no monitoring data in Renac SEC?
Fault Description：
The user registered the inverter and set the wifi but there is no monitoring data on Renac SEC.
Cause of occurrence:
(1) The WIFI configuration is unsuccessful.
(2) Network problem.
(3) Mac’s address is wrong.
